OBERON A626

HIGH PERFORMANCE ENGINE & COMPRESSOR FLUSH

DESCRIPTION

Oberon A626 is an engine and air compressor flush, specially formulated from effective detergents, ashless dispersants, powerful solvents and selective lubricants which enable engine and gear systems, reservoirs and lines of machinery to be thoroughly cleaned.

CHARACTERISTICS

Removes Contaminants 

The superior detergent-dispersant chemistry in Oberon A626 eliminates contaminants instantly. The solvency of Oberon A626 rapidly suspends and destroys gums, sludge and varnish on engine parts. The suspended contaminants are then easily removed after an oil change.

Saves Your New Oil 

After every oil change, impurities and residues from the old oil remain on engine parts. These deposits contaminate the new oil and deplete its additives even before the new oil additives start to protect the engine. Regular use of Oberon A626 engine flush thoroughly removes all remaining contaminants and ensures new oil stays at their peak.

Prevents Corrosion 

When deposits from the old oil contaminate the new oil and deplete its additives, it also takes away protection against acid build-up. Oberon A626 neutralises the acids and prevent corrosion and rust to give maximum lubrication.

Removes Glycol Build-Up 

Glycol anti-freeze destroys additives in motor oil and robs the oil of its lubricity. An accumulation of glycol can cause engine seizure. Oberon A626 flushes out damaging glycol build-up to ensure longer engine life.

APPLICATION 

Use 250ml of Oberon A626 for every 5 litres of oil

1. While engine is warm, add Oberon A626 as recommended to existing dirty engine oil.

2. Idle engine for 10-15 minutes

3. Drain dirty oil while engine is hot

4. Replace new oil filters and pour in the fresh oil
5. To ensure maximum engine protection, use Oberon A626 with each oil change.